What is Area Rule and What Aircraft were developed?

What is Area Rule and What Aircraft were developed?


The area rule is an important concept related to the drag on an aircraft or other body in transonic and supersonic flight. The area rule came into being in the early 1950s when production fighter designs began pushing ever closer to the sound barrier. Designers had found that the drag on these aircraft increased substantially when the planes traveled near Mach 1, a phenomenon known as the transonic drag rise illustrated below. This increase in drag is due to the formation of shock waves over portions of the vehicle, which typically begins around Mach 0.8, and this drag increase reaches a maximum near Mach 1. Because of its source, this type of drag is referred to as wave drag.


Increase in wave drag at transonic Mach numbers

Since the physics of supersonic flight were still largely a mystery to manufacturers, designers had no idea how to address this problem except to provide their aircraft with more powerful engines. Even though jet engine technology was rapidly advancing in those days, the first generation of jet-powered fighters was hampered by relatively low thrust engines which limited them to subsonic flight. The US Air Force hoped to overcome this deficiency with its first dedicated supersonic fighter, the F-102 Delta Dagger. Since the transonic drag rise was still not fully understood, the F-102's designers chose an engine they believed would provide enough thrust to reach a maximum speed of about Mach 1.2. However, initial flight tests of the YF-102 prototype indicated that the aircraft couldn't even reach Mach 1. The Convair engineers were baffled by this lack of performance until a NACA researcher named Dr. Richard Whitcomb developed the area rule.

Whitcomb experimented with several different axisymmetric bodies and wing body combinations in a transonic wind tunnel. What he found was that the drag created on these shapes was directly related to the change in cross-sectional area of the vehicle from the nose to the tail. The shape itself was not as critical in the creation of drag, but the rate of change in that shape had the most significant effect. For the mathematically inclined, we can say that wave drag is related to the second-derivative (or curvature) of the volume distribution of the vehicle.
Whitcomb area rule test models

(a) cylindrical fuselage, (b) fuselage with wings, (c) bulged fuselage, (d) waisted fuselage with wings


To illustrate the point, four of Whitcomb's experimental models are drawn above, representing a simple cylindrical fuselage, the same fuselage with wings attached, a bulged fuselage, and a "pinched" fuselage with wings. What Whitcomb discovered was that the addition of wings to the basic cylinder produced twice as much drag as the cylinder alone. He also found that drag rose by the same amount if a simple bulge were added to the cylinder, the bulge being of equivalent volume as the wings. However, if he reduced the cross-sectional area of the fuselage over the region were the wings were attached, shown as body "D," the total drag was about the same as that of the cylinder alone.

The conclusion of this research was that shaping the vehicle to create a smooth cross-sectional area distribution from the nose to the tail could drastically reduce the drag on an aircraft. The area rule tells us that the volume of the body should be reduced in the presence of a wing, tail surface, or other projection so that there are no discontinuities in the cross-sectional area distribution of the vehicle shape.

Effect of the area rule on overall vehicle shape


Whitcomb's findings are related to a more theoretical concept called the Sears-Haack body. This shape yields the lowest possible wave drag for a given length and volume. The variation in cross-sectional area for a Sears-Haack body, illustrated in the following figure, tells us that wave drag is minimized when the curvature of the volume distribution is minimized. The closer the volume distribution of an aircraft or other high-speed vehicle comes to the ideal Sears-Haack body, the lower its wave drag will be.
Volume distribution of a Sears-Haack body


Whitcomb's research was a major breakthrough in supersonic aerodynamics and had  an immediate effect on the design of the aforementioned F-102 fighter. Convair  engineers quickly redesigned the aircraft's fuselage, taking the area rule concept into account, to create the "waisted" or "coke-bottle" fuselage. This modification, plus a new engine, allowed the aircraft to easily exceed Mach 1 and achieve a maximum speed over Mach 1.5.









Today's supersonic fighters are fitted with much more powerful engines than were available in the 1950s, so the area rule is not as essential to their design as it used to be. However, it has found greater application to subsonic aircraft, particularly commercial airliners since they cruise at the lower end of the transonic regime. A good example is the Boeing 747, known for its distinctive "hump." This hump, which houses the cockpit and upper passenger deck, increases the cross-sectional area of the forward fuselage and has the effect of evening the volume distribution over the length of the aircraft. As a result, the 747 is able to cruise efficiently at a slightly higher speedthan most other airliners since the increase in transonic wave drag is delayed.

Comments

Post a Comment

Popular posts from this blog

EASA : Module17 Propeller Question - Answer

Image
EASA : Module17 Propeller Question - Answer On which type of turbo-propeller would you expect to find a parking brake a) compounded twin spool b) free turbine c) direct coupled twin spool Ans:b * Propeller blade angle a) increases from root to tip b) decreases from root to tip c) is constant along the blade length Ans:b * The purpose of the pitch change cams is to a) convert linear motion to rotary motion. b) convert rotary motion to linear motion. c) prevent windmilling Ans:a * What does the torque meter reading indicate in a gas turbine engine? a) Torque reaction at the reduction gear b)  Engine torque c) The ratio between engine thrust and engine torque Ans:a * The gear type pump in a C.S.U. or P.C.U a) lubricates the entire propeller system b)  boosts engine oil system pressure c) assist the governor valve to move Ans:b * The gear segments on the blade roots of a hydromatic propeller mesh with the a) stationary cam b)  torque tubes and eye b...
Read more

Adverse yaw!!! Roll causes Yaw and Yaw causes Roll...

Image
Do you know what adverse yaw is and how to solve it? To understand what adverse yaw is, we need to first explain the axes of motion for an  airplane. An aircraft in flight can rotate around three different axes, as illustrated below. Aircraft control surfaces However, the effect of one control surface is not always limited to just pitch, roll, or yaw  alone. When the deflection of one control surface affects more than one of these  orientations, we say that the orientations are coupled. The most important of these  coupled interactions is adverse yaw. To better understand the concept, let's study a  picture of what happens when the pilot deflects the ailerons to roll the aircraft. As you can see, the aircraft rolls because one aileron is deflected downward while the other is deflected upward. Lift increases on the wing with the downward-deflected aileron because the deflection effectively increases the camber of that portion of the wing. Conversely, lift decreas...
Read more

Aircraft Landing Gear

Image
Why do aircraft have only three landing gear? Why not four? Most aircraft today have three landing gear. Two main landing gear struts located near the middle of the aircraft usually support about 90% of the plane's weight while a smaller nose strut supports the rest. This layout is most often referred to as the "tricycle" landing gear arrangement. However, there are numerous other designs that have also been used over the years, and each has its own advantages and disadvantages. Let's take a closer look at the various undercarriage options available to engineers. Tail-wheel or Tail-dragger :  Gear Though the tricycle arrangement may be most popular today, that was not always the case. The tail-wheel undercarriage dominated aircraft design for the first four decades of flight and is still widely used on many small piston-engine planes. The tail-dragger arrangement consists of two main gear units located near the center of gravity (CG) that support the majority of the p...
Read more