DGCA PAPER-1 (Civil Aviation Regulation) JUN-06

DGCA PAPER-1 JUNE -2006


       Temporary C of R is valid
a) Until A/c first lands at a custom aerodrome      b) For a period of 1 month
c) Till permanent C of R is issued                                    d) none of above

       Engine powers checked by
a) CAT ‘A’ lie holder                                   b) cat ‘c’ license holder
c) Flight crew                                              d) None of the above

      Load & Trim sheet prepared in
a) Duplicate     b) Triplicate      c) quadruplicate     d)One copy only

      Document record for issue of permit to fly
a) Erection certificate of AME in cat B
b) pilot holding PPL
c) Document certifying area of clearance by NAA
d) All of above

      Duplicate inspection procedure outlined in
a)Operational manual                                          b)M.S Manual                   
c) Q.C Manual                                                         d) As in b & C

       SSID is issued by
a) Manufactures                                       
b) Airworthiness authority of manufacture of a/c
c) Operator in consultant with DGCA  
d) All of above

      After major repair / overhaul test of an a/c, component a certificate issued is
a) C of FR.                                                    
b) C of maintenance      
c) As in (b) it is a part of inspection schedule
d) As in (a) & it is a part of inspection schedule
       
        MEL is approved by
a)        DGCA headquarters                                             b) RAO                      
c)         Approved person                                                   d) AME

       Accountable manager is required for organization approved under
a)        CAT A to CAT G                                           b) CAT C & E            
c)         CAT E only                                                    d) None of the above

       Private a/c with seating capacity upto 19, the FRC is valid for
a) 30 hr/30 days                                                     b)25 hr /15 days               
c) Approved by DGCA                                           d) None of the above

        Section 3 of CAR is
a)        Airworthiness                                              b)        Air transport         
c)         Air safety                                                      d)        Air operation

        Which manual is approved by RAO?
a) QC manual     b) Operation manual    c) Organization Manual     d) Air operation

        Special inspection schedule in case of schedule a/c approved by
a) QCM                     b) RAO                       c) operator               d) DGCA

        Section 3 of log book contain
a) Replacement                                                       b)Modification                  
c) Inspection                                                            d) Repair

      C of R is preserved for
a) 12 months                                                
b) 24 months        
c) 6 months                                                 
d) None of the above (as specified in C of R)

      State govt. a/c certified in
a)Normal CAT sub division passenger a/c  b)Normal CAT sub division special
c) Aerobatic a/c                                                      d) Special cat a/c

      For newly imported a/c validity of C of A start from
a) From date of issue export   C of A             
b) From date of issue of Indian c of A
c) From date of cancellation of export c of A
d) Both @ & b

      Aero engine design code is
a) FAR 27       b) FAR 33          c) JAR 35             d) JAR 33

     
     Outgoing & incoming release note is preserved for
a) 15 years          b) 2 Years              c) 10 Years              d) 20 Years

      Foreign student’s security clearance is the responsibility of
a) C.I                                                                           b) Chief Engineer         
c) Regulatory authority                                        d) Owner of organization

      Document required for export of engine and propeller
a) Export C of A                                                       b) Approved tag          
c) As in (a) compliance with FAR 21                           d) Approval of DGCA

      Special flight permission is issued when
a) C of A is in valid condition            b) C of A is in invalid Condition         
c) As in @but when a/c not in safe for flight              d)Both a & c are correct

      In case of approved organization the L/A is certified by
a) Cat B                                 b) cat A&C                            c) QCM                     

      When the modification is carried out it must be informed to
a) AME                                                                      b) Manufacturer   
c) R & D of DGCA                                                    d) None of the above

      In house audit report is carried out
a) Twice a year                                           b) Once in a year              
c) Thrice in a year                                       d) none.

      Airworthiness advisory circular 02/2000 is
a) Banner towing                                       b) Accountable Manager                  
c) Airworthiness Surveillance              d) None of the above

      Entry Manual logbooks shall be done with in
a) 24hrs of completion of work          b) 48 hrs of completion of work         
c) Immediately after of completion work       d) within a week

      When every extra work is carried on a/c the entry will be in
a) Appropriate log book                                       b) A/c   log book      
c) Additional sheet / off job Sheets               d) working copies of log book


      During over wing fuelling the nozzle of the hose bonded to
a) A/c before filler cap is removed                            
b) Fueling vehicle before filler cap is removed
c) Grounded to the earth                                    
d) None of the above

     What is the minimum intensities of light on a/c for port, starboard & rear
            a)3,2,3                  b)5,5,3                      c) 3,5,3                      d)3,3,5     
  
      Temporary   C of R is valid till
a) On date basis                               
b) On hour basis                 
c) First landing to a custom aerodrome in India

      Form reqd. for registration
a) CA 25           b) CA28             c) CA68           d)CA 33

      Which relates to CAT B for registration of a/c.
a) Person citizen of India                                    
b) Person carrying out business in India but not citizen
c) State government a/c                                     
d) Central government a/c

       Investigation of failed components completed within
a) 6 months                b) 3 months            c) 1 years            d)            2 year

      Who is responsible to issue taxi permit
a) Sub RAO                 b) RAO                    d) DGCA             d)   QCM

      When micro light a/c are registered the identification plate have
a) A/C serial no.                                                     
b) Name & address of registered owner             
c) Registration marking                                       
d) All of the above

      Aerial work a/c comes under
a) ICAO Annex 6 part III                                      b) ICAO Annex 7
c) ICAO Annex 8                                                     d) ICAO Annex 5

      Who is responsible to release the a/c before test flight?
a) PIC    b) AME in License A&C   c) AME in License B  d) Chief inspector

      Defect causing mechanical delay must be informed to RAO like

      The components associated with major defects be preserved
a) Two weeks from date of information                  
b) one week from date of information
c) One month from date of information                    
d) Two months from date of information

      Operator carrying out in-house audit
a) At least once a year                             b) At least once in 6 months          
c) At least twice in 6 months                               d) At least twice a year

      COSL and special inspection schedule is reflected in
a) QC Manual                                                          b)MS manual       
C) Operational Manual                                         d) Serviceable Tag

      Procedure for awarding work to subcontractor is mentioned in
a) Engineering organization manual              
b) QC manual   
c) All of the above

Comments

Post a Comment

Popular posts from this blog

EASA : Module17 Propeller Question - Answer

Image
EASA : Module17 Propeller Question - Answer On which type of turbo-propeller would you expect to find a parking brake a) compounded twin spool b) free turbine c) direct coupled twin spool Ans:b * Propeller blade angle a) increases from root to tip b) decreases from root to tip c) is constant along the blade length Ans:b * The purpose of the pitch change cams is to a) convert linear motion to rotary motion. b) convert rotary motion to linear motion. c) prevent windmilling Ans:a * What does the torque meter reading indicate in a gas turbine engine? a) Torque reaction at the reduction gear b)  Engine torque c) The ratio between engine thrust and engine torque Ans:a * The gear type pump in a C.S.U. or P.C.U a) lubricates the entire propeller system b)  boosts engine oil system pressure c) assist the governor valve to move Ans:b * The gear segments on the blade roots of a hydromatic propeller mesh with the a) stationary cam b)  torque tubes and eye b...
Read more

Canted Vertical Tails - Why are the stabilizers on planes like the F-18 and F-22 slanted?

Image
Why are the stabilizers on planes like the F-18 and F-22 slanted? The tail configuration is usually referred to as canted vertical tails, since the vertical stabilizers are canted away from being 90° straight up and down. As illustrated in the below photo of the F-18 Hornet, this design has become increasingly common on modern military aircraft. Canted vertical stabilizers on the F-18 Other well-known examples of this trend include the F-22 Raptor, F-117 Nighthawk stealth fighter, and F-35 Joint Strike Fighter. The feature traces its roots back to the 1960s when canted tails were incorporated into the SR-71 Blackbird and its predecessors, as shown below. Canted vertical stabilizers on the SR-71 Lockheed designers included these canted tails based on early research into stealth technology. As far back as the 1940s, engineers had realized that perpendicular surfaces, like vertical tails, generated strong radar returns. By canting the tails away from 90°, the radar cross-section (RCS) of ...
Read more

DGCA & EASA Module 15 : Part-13 Engine Starting and Ignition Systems Question

Image
DGCA & EASA Module 15 : Part-13 Engine Starting and Ignition Systems Question-Answer 1. In the H.E.I.U. the discharge resistors. A. allows the capacitors to discharge when the unit is switched off. B. allows sufficient voltage to be stored to provide relight facilities up to 55,000 ft. C. protects the unit from excessive voltages. Ans : allows the capacitors to discharge when the unit is switched off. Explanation: NIL. 2. In the H.E.I.U. the choke. A. prolongs the life of the plug. B. protects the unit from excessive high voltages. C. prolongs the discharge. Ans : prolongs the discharge. Explanation: NIL. 3. In an electrical starting system, the slow start resistor is short circuited by the. A. centrifugal Switch. B. time switch. C. overspeed switch. Ans : centrifugal Switch. Explanation: NIL. 4. The advantage of an air starter system is. A. it provides a more rapid start. B. it is light, simple and economical. C. there is ...
Read more